Duramax

View as Grid List

55 items

Page
Set Ascending Direction
per page
Filter
  1. Xtrude Core Heavy Duty Trans Cooler w/Fan & -10 JIC Male Connection
    $190.00

    The BD-Power high efficiency micro extruded bar technology provides 22% more cooling over other designs. The 25 flat tubes have 200micro extruded passages providing a large surface area to transfer heatfor external air flow cooling. With a power rating of 33,930 BTU/HR it's designed for an excess of 30,000 GVW. Large end tanks provide up to 5/8" ID hose compatibility. 80-Watt, 10-inch, 800CFM electric fan offers the ultimate automatic transmission oil temperature control.

    Learn More
    Quick Shop Compare
  2. Stanadyne Performance Formula Fuel Additiive 8oz/235ml
    $5.38

    Stanadyne Performance Formula protects your diesel engine and restores engine performance the detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque.

    Learn More
    Out of stock
    Quick Shop Compare
  3. Adapter - T4-T3 Manifold Flange
    $100.00

    Inexpensive alternative to replacing the manifold and allows for quicker changes back and forth from different mount turbos.

    Learn More
    Quick Shop Compare
  4. OIL DRAIN KIT - Borg Warner S300 / S400 / S500 Turbos
    $70.00

    Features
    Comes with turbo drain adapter, engine block adapter, 24in length hose and clamps

    Learn More
    Quick Shop Compare
  5. Lubricity Formula 16 oz/470ml
    $7.50
    Approved by Original Equipment Manufacturers (OEMs) This extra strength lubricity improver is for use with very dry or "winter blend" fuels such as, jet fuel, kerosene or #1 diesel. This product contains no alcohol and is specially formulated for ultra low sulfur diesel. Learn More
    Quick Shop Compare
  6. Throttle Sensitivity Booster Push Button Switch Kit
    $65.00

    Features
    Push button control
    6-modes
    Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Ludicrous"

    Learn More
    Quick Shop Compare
  7. Xtrude Double Stacked Transmission Cooler Kit - Universial 5/8in Tubing
    $606.00
    Features

    Large surface area to transfer heat for external air flow cooling
    Turbulent oil flow design promotes a more complete cooling
    Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal
    Kits complete with all fittings, clamps, hoses and hardware
    Learn More
    Quick Shop Compare
  8. Flow-MaX Add-On Pre Water Separator Filter Kit
    $62.00
    Features
    20 micron efficiency

    Filter Modular Design

    Add-on High Efficiency Filter and/or Water Separator

    Easy to find Non-Proprietary Filter Cartridges

    Learn More
    Quick Shop Compare
  9. High Torque Hose Clamp - 3.5in
    $17.50

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

    Learn More
    Quick Shop Compare
  10. Xtrude Trans Cooler - Double Stacked (No Install Kit)
    $406.00
    Features
    Cooler Assembly Only
    Double stacked cores deliver over 40,000 BTU/HR of cooling
    Over 350% temperature drop versus the factory system
    136% better temperature drop than XTRUDED single core kit
    Motor is IP54 with 65% duty cycle Learn More
    Quick Shop Compare
  11. GAUGE KIT, Back Pressure - 160psi
    $63.00

    Features
    Liquid filled gauge for setting up back pressure regulation on butterfly style exhaust brakes

    Learn More
    Quick Shop Compare
  12. BD Diesel 1453523 T6 S400/S300 Turbo Blanket
    $215.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  13. Performance Formula 64oz/1.9L
    $31.52
    The detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque. Stanadyne Performance Formula protects your diesel engine and restores engine performance this product meets all engine fuel system requirements and will not harm exhaust aftertreatment systems.

    Learn More
    Quick Shop Compare
  14. High Torque Hose Clamp - 4in
    $13.00

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles.

    Learn More
    Quick Shop Compare
  15. Universal Electric Cooling Fan Kit - 80-watt 10-inch 800 CFM
    $79.99

    Features
    Use as pusher (default) or puller
    10-inch diameter
    800 CFM flow
    80-watt electric motor
    Universal mounting kit
    Motor is IP54 with 65% duty cycle

    Learn More
    Quick Shop Compare
  16. INTAKE KIT, Track Master - 5-inch Inlet
    $237.00

    Features
    Open air intake kit
    Washable cone style air filter
    Intake pipe coupler
    Clamps
    Intake pipe - 5in

    Learn More
    Quick Shop Compare
  17. Flow-MaX Pump Pressure Spring - 13psi
    $8.00

    Flow-Max pressure regulation springs

    Learn More
    Quick Shop Compare
  18. BD Diesel 1453521 T3 S300 Turbo Blanket
    $170.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  19. High Torque Hose Clamp - 2.75in
    $13.00

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles.

    Learn More
    Quick Shop Compare
  20. Remote Fuel Filter Kit - 2001-2012 Chevy Duramax
    $137.00
    Features
    Additional media surface that holds the dirt
    Flows enough fuel to support 600 horsepower
    Stopping particles down to two microns nominal, five microns absolute
    Frame rail mounted Learn More
    Quick Shop Compare
  21. BD Diesel Full Bore Exhaust Manifold for 2001-10 GM 6.6L Duramax
    $165.00

    Features:

    • Replaces factory driver's side "pinched down" unit
    • Restores exhaust flow and balances the V8 engine for smoother running
    • Improves exhaust velocity to drive the turbocharger
    • Improves power
    • Direct, bolt-in replacement
    • Tapped to accept the most popular EGT probes
    • High-silicon ductile iron
    • Lower EGT's

    Warranty

    Parts

    • 36-Months
    • 75,000 Miles

    Note

    • Gaskets sold separately



    Learn More
    Quick Shop Compare
  22. BD Diesel 1046275 Intake Hose & Clamp Kit for 2001-2004 GM 6.6L Duramax LB7
    $270.00

    Features:

    • Each Hose is designed to meet 3x their working pressure
    • Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
    • Higher pressure applications have a Red Iron Oxide internal color
    • Flurosilicone elastomers and Fluorocarbon withstands oily residues
    • Spring-loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
    • Many specific kits for specific vehicles, turbochargers, and intercoolers

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  23. BD Diesel Cool Down Timer Kit v2.0 for 1994-2016 Ford | 1994-2005 Dodge | 2001-2014 GM
    $200.00

    Features:

    • Prevent turbo damage during hot engine shutdown
    • EGT, time and manual controlled shutdown
    • Works with any K-Type EGT probe
    • Compatible with most OEM vehicle security alarms
    • Reduces DPF regeneration on 2008-up vehicles
    • Dodge 1994-2005 5.9L Cummins
    • Ford 1994-2016 PowerStroke 7.3L/6.0L/6.4L/6.7L
    • Chevy 2001-2014 Duramax 6.6L

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles


    Learn More
    Quick Shop Compare
  24. BD Diesel 1453522 T4 S300/S400 Turbo Blanket
    $195.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  25. Flow-MaX Add-On Post Fine Particle Fuel Filter Kit
    $59.00
    Features
    Filter cartridge has 3 micron rating

    Filter Modular Design

    Add-on High Efficiency Filter and/or Water Separator

    Easy to find Non-Proprietary Filter Cartridges

    Learn More
    Quick Shop Compare
  26. Boot Lock Kit - Intercooler Boot Retainer
    $45.00
    Includes aluminum and steel threaded stand-offs to weld onto turbo, intercooler & pipes
    No welding required on some BD and Borg Warner turbos
    Accommodates boots up to 5 inches in length

    Learn More
    Quick Shop Compare
  27. Converter, Mult-Disc - 2001-2012 Chevy Duramax Allison 1000
    $1,150.00
    Features
    Enhanced Stall - Street/Towing applications
    Machined pistons
    Eliminates warpage from clutch heat
    Engineered tighter tolerances
    Self-centering teeth design increases contact decreases wear and chatter
    Riveting process ensures alignment & eliminates vibration or embrittlement from welding
    Learn More
    Quick Shop Compare
  28. Flow-MaX Fuel Lift Pump for Chevy Silverado 6.6L Duramax 2001-2014
    $525.00

    Tow With Confidence

    Features:
    Single Pump Flows 150 GPH - Up To 600HP
    Unique Gerotor Design
    Ultra Quiet & Compact
    Versatile Frame Mount
    5-Year Limited Warranty
    Fits:
    2001 - 2014 Chevy Silverado 6.6L Duramax Diesel Trucks
    Important:
    To fully maximize the power of the pump, we HIGHLY recommend adding the Pre Water Separator Filter & Post Fine Particle Fuel Filter available below.
    Learn More
    Quick Shop Compare
  29. Gauge Kit - Exhaust Gas Temp L/D Truck (Post Turbo) - Black Face
    $225.00

    Features
    Keep track of your exhaust gas temperatures to protect your engine
    2-1/16" Diameter
    10' Lead with 1/8"NPT Thermocouple
    Black face - Color coded dial - White pointer
    Post turbo install - 1500'f

    Learn More
    Quick Shop Compare
  30. Deep Sump Trans Pan - 2001-2014 Chevy Allison 1000
    $395.00

    Features
    High volumes of cool oil equate to long transmission life
    Pans increase oil capacity
    Aluminum construction and heat-dissipating fins keep temperature down
    Increased rigidity prevents case twisting
    Kit includes a magnetic drain plug and temperature sending unit port

    Learn More
    Quick Shop Compare
View as Grid List

55 items

Page
Set Ascending Direction
per page