Duramax

View as Grid List

58 items

Page
Set Ascending Direction
per page
Filter
  1. Xtrude Core Heavy Duty Trans Cooler w/Fan & -10 JIC Male Connection
    $190.00

    The BD-Power high efficiency micro extruded bar technology provides 22% more cooling over other designs. The 25 flat tubes have 200micro extruded passages providing a large surface area to transfer heatfor external air flow cooling. With a power rating of 33,930 BTU/HR it's designed for an excess of 30,000 GVW. Large end tanks provide up to 5/8" ID hose compatibility. 80-Watt, 10-inch, 800CFM electric fan offers the ultimate automatic transmission oil temperature control.

    Learn More
    Quick Shop Compare
  2. Stanadyne Performance Formula Fuel Additiive 8oz/235ml
    $5.38

    Stanadyne Performance Formula protects your diesel engine and restores engine performance the detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque.

    Learn More
    Out of stock
    Quick Shop Compare
  3. Adapter - T4-T3 Manifold Flange
    $100.00

    Inexpensive alternative to replacing the manifold and allows for quicker changes back and forth from different mount turbos.

    Learn More
    Quick Shop Compare
  4. OIL DRAIN KIT - Borg Warner S300 / S400 / S500 Turbos
    $70.00

    Features
    Comes with turbo drain adapter, engine block adapter, 24in length hose and clamps

    Learn More
    Quick Shop Compare
  5. HornBlasters TA-508H - 5 Gallon Black 8 Port Air Tank
    $69.99

    Need more air?

    Features

    • D.O.T. Approved!
    • Made In The USA. Quality Does Matter.

    Kit Includes

    • One HornAir 5 Gallon Air Tank
    • Product Notes: You *must not* pressurize this air tank over 200 PSI. Doing so is dangerous and may result in serious injury or death.
    • It is recommended to run these tanks at 150 PSI for the best performance.
    • Air tanks are not designed for use indefinitely. They must be replaced every 5-10 years or if signs of wear, stress, fatigue, or any sort of damage appear.
    • To ensure the longest use of your tank you should drain it regularly. Allowing condensate to build up in your tank will not only shorten the lifespan of your tank but is a safety concern.
    Learn More
    Quick Shop Compare
  6. FASS Titanium Series Optional Electric Diesel Fuel Heater Kit
    $151.05

    ELECTRIC DIESEL FUEL HEATER KIT

    Features:

    • Dispenses Heat through FASS Pump and Filters
    • Aids in Cold Weather Starts
    • Prevents Fuel Gelling
    • Automatic On/Off Heater
    • Fits Titanium Series System
    • Complete Installation Kit

    Note: Titanium Series Pumps have ports for 2 Electric Heaters.

    Learn More
    Quick Shop Compare
  7. Lubricity Formula 16 oz/470ml
    $7.50
    Approved by Original Equipment Manufacturers (OEMs) This extra strength lubricity improver is for use with very dry or "winter blend" fuels such as, jet fuel, kerosene or #1 diesel. This product contains no alcohol and is specially formulated for ultra low sulfur diesel. Learn More
    Quick Shop Compare
  8. Throttle Sensitivity Booster Push Button Switch Kit
    $65.00

    Features
    Push button control
    6-modes
    Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Ludicrous"

    Learn More
    Quick Shop Compare
  9. Xtrude Double Stacked Transmission Cooler Kit - Universial 5/8in Tubing
    $606.00
    Features

    Large surface area to transfer heat for external air flow cooling
    Turbulent oil flow design promotes a more complete cooling
    Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal
    Kits complete with all fittings, clamps, hoses and hardware
    Learn More
    Quick Shop Compare
  10. Flow-MaX Add-On Pre Water Separator Filter Kit
    $62.00
    Features
    20 micron efficiency

    Filter Modular Design

    Add-on High Efficiency Filter and/or Water Separator

    Easy to find Non-Proprietary Filter Cartridges

    Learn More
    Quick Shop Compare
  11. High Torque Hose Clamp - 3.5in
    $17.50

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

    Learn More
    Quick Shop Compare
  12. Xtrude Trans Cooler - Double Stacked (No Install Kit)
    $406.00
    Features
    Cooler Assembly Only
    Double stacked cores deliver over 40,000 BTU/HR of cooling
    Over 350% temperature drop versus the factory system
    136% better temperature drop than XTRUDED single core kit
    Motor is IP54 with 65% duty cycle Learn More
    Quick Shop Compare
  13. GAUGE KIT, Back Pressure - 160psi
    $63.00

    Features
    Liquid filled gauge for setting up back pressure regulation on butterfly style exhaust brakes

    Learn More
    Quick Shop Compare
  14. BD Diesel 1453523 T6 S400/S300 Turbo Blanket
    $215.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  15. Performance Formula 64oz/1.9L
    $31.52
    The detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque. Stanadyne Performance Formula protects your diesel engine and restores engine performance this product meets all engine fuel system requirements and will not harm exhaust aftertreatment systems.

    Learn More
    Quick Shop Compare
  16. High Torque Hose Clamp - 4in
    $13.00

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles.

    Learn More
    Quick Shop Compare
  17. Universal Electric Cooling Fan Kit - 80-watt 10-inch 800 CFM
    $79.99

    Features
    Use as pusher (default) or puller
    10-inch diameter
    800 CFM flow
    80-watt electric motor
    Universal mounting kit
    Motor is IP54 with 65% duty cycle

    Learn More
    Quick Shop Compare
  18. INTAKE KIT, Track Master - 5-inch Inlet
    $237.00

    Features
    Open air intake kit
    Washable cone style air filter
    Intake pipe coupler
    Clamps
    Intake pipe - 5in

    Learn More
    Quick Shop Compare
  19. Flow-MaX Pump Pressure Spring - 13psi
    $8.00

    Flow-Max pressure regulation springs

    Learn More
    Quick Shop Compare
  20. Pypes 5" Dual Stack Stainless Universal Kit With 5" x 10" x 36" Tips
    $880.00

    Here's Your Stacks!

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    T-409 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are 10" Wide, 36" Long, T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  21. Raptor® Lift Pump Chevy/GMC Duramax 2001-2010 ([email protected] 8psi)
    $415.00
    Performance Replacement Lift Pumps for Diesel Trucks and Equipment.
    The Raptor® Lift Pumps allows more fuel to flow than a stock pump. If you have an upgraded engine with larger injectors, etc., then the Raptor® Lift Pump can improve fuel flow for improved performance. A large engine can starve for fuel if a better, high rate flow pump is not used! Learn More
    Quick Shop Compare
  22. BD Diesel 1453521 T3 S300 Turbo Blanket
    $170.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  23. High Torque Hose Clamp - 2.75in
    $13.00

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles.

    Learn More
    Quick Shop Compare
  24. Snow Performance MPG-max Water-methanol Injection System- Universal
    Special Price $899.99 was $947.36

    Benefits:

    • Made In USA
    • Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
    • Increased Fuel Economy
    • Reduced EGTs 100-350 Degrees
    • Increased HP 65+
    • Increased Boost
    • Cleans Engine Combustion Of Carbon Build Up
    • Reduced Emissions (Less Regen) 
    • Application:
      Universal - All Makes & Models

    Whats In The Box:

    • 300 PSI Extreme Environment UHO (Ultra High Output) Pump
    • All Tubing Necessary for Installation
      • 20 ft ¼ Inch High Temp Nylon Tubing
      • 36 Inches High pressure Boost Line
    • Digital Variable Mapping Controller
    • EGT Probe
    • Dual Nozzle Upgrade
    • Power Solenoid Upgrade
    • Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
    • 2 Nozzle Holder/Check Valve Combo
    • 3 Snow Performance Hypersonic™ Nozzles to cover a wide range of HP
    • Required Hardware Needed For Installation
    • Snow Performance Running S Decal
    • Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
    • Snow Performance 1-Year Warranty
    Learn More
    Quick Shop Compare
  25. Pypes 5" Dual Stack Black Coated Universal Kit With 5" x 6" x 36" Tips
    $852.00

    Here's Your Stacks!

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    Black Powder Coated T-304 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are Black Coated T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  26. Pypes 5" Dual Stack Stainless Universal Kit With 5" x 6" x 36" Tips
    $719.00

    Here's Your Stacks!

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    T-409 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  27. Pypes 5" Dual Stack Stainless Universal Kit With 5" x 7" x 36" Tips
    $771.00

    Here's Your Stacks!

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    T-409 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are 7" Wide, 36" Long, T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  28. Pypes 5" Dual Stack Black Coated Universal Kit With 5" x 7" x 36" Tips
    $906.00

    Sleek Phantom Stacks

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    Black Powder Coated T-304 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are 7" Wide, 36" Long, Black Coated T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  29. Pypes 5" Dual Stack Stainless Universal Kit With 5" x 8" x 36" Tips
    $821.00

    Here's Your Stacks!

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    T-409 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are 8" Wide, 36" Long, T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  30. Pypes 5" Dual Stack Black Coated Universal Kit With 5" x 8" x 36" Tips
    $967.00

    Sleek Phantom Stacks

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    Black Powder Coated T-304 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are 8" Wide, 36" Long, Black Coated T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
View as Grid List

58 items

Page
Set Ascending Direction
per page