Duramax

View as Grid List

79 items

Page
Set Ascending Direction
per page
Filter
  1. High Output LED Headlight Conversion Kit | 4Ever Lighting
    Special Price $125.00 was $149.00

    Improve the headlight output on your diesel truck with our High Output LED Headlight Kit is designed to work on all vehicles and will provide 3 times the lighting capabilities of your current bulbs. Our LED Kits are built to last and covered by a lifetime warranty. Unlike other LED headlight kits, there is no fan - only a heat sink, this means you don't have to worry about the fan going out. Available in Crystal White. Order By Bulb Size. If you don't know the bulb size contact us or check this bulb guide.

    • Lifetime Guarantee: This is the last time you will have to change your headlight bulbs.
    • Easy Installation - Simply Replace Your Bulb!
    • Integrated Aviation Aluminum Heat Sink instead of the fragile fan found in many kits.
    • Included Rubber grommets provide enhanced resistance to moisture
    • At up to 3X greater brightness than standard halogen bulbs, you won't believe what you've been missing.
    Learn More
    Quick Shop Compare
  2. Xtrude Core Heavy Duty Trans Cooler w/Fan & -10 JIC Male Connection
    $190.00

    The BD-Power high efficiency micro extruded bar technology provides 22% more cooling over other designs. The 25 flat tubes have 200micro extruded passages providing a large surface area to transfer heatfor external air flow cooling. With a power rating of 33,930 BTU/HR it's designed for an excess of 30,000 GVW. Large end tanks provide up to 5/8" ID hose compatibility. 80-Watt, 10-inch, 800CFM electric fan offers the ultimate automatic transmission oil temperature control.

    Learn More
    Quick Shop Compare
  3. Stanadyne Performance Formula Fuel Additiive 8oz/235ml
    $5.38

    Stanadyne Performance Formula protects your diesel engine and restores engine performance the detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque.

    Learn More
    Out of stock
    Quick Shop Compare
  4. Adapter - T4-T3 Manifold Flange
    $100.00

    Inexpensive alternative to replacing the manifold and allows for quicker changes back and forth from different mount turbos.

    Learn More
    Quick Shop Compare
  5. Edge EAS Starter Cable & EGT Probe
    Special Price $119.95 was $148.21

    A Must For the Diesel Daily Driver or Tower

    Features:
    EAS Starter Cable Allows for Future Expandability
    Simple, Daisy Chaining Hook Up
    Extra EGT Probe Allows for Monitoring of Multiple Locations
    Compatible with Edge CS2 & CTS2 Products
    Learn More
    Quick Shop Compare
  6. FASS Titanium Series High Efficiency Replacement Fuel Filter
    Special Price $20.90 was $22.00

    High Quality Materials Designed to Last

    FASS Titanium Series High Efficiency Replacement Fuel Filter:
    High Quality Materials Built to Perform
    5 Micron Filtration with Excellent Flow
    30,000 Miles Service
    Made in the USA
    Fitment:
    Direct replacement for your FASS Fuel Systems Titanium Series Fuel Filter.
    * If you have an older FASS Platinum Series Pump (Single Filtered Unit) we do not suggest using the FF-3003 as a replacement for the FWS-3003.
    Learn More
    Quick Shop Compare
  7. OIL DRAIN KIT - Borg Warner S300 / S400 / S500 Turbos
    $70.00

    Features
    Comes with turbo drain adapter, engine block adapter, 24in length hose and clamps

    Learn More
    Quick Shop Compare
  8. HornBlasters TA-508H - 5 Gallon Black 8 Port Air Tank
    $69.99

    Need more air?

    Features

    • D.O.T. Approved!
    • Made In The USA. Quality Does Matter.

    Kit Includes

    • One HornAir 5 Gallon Air Tank
    • Product Notes: You *must not* pressurize this air tank over 200 PSI. Doing so is dangerous and may result in serious injury or death.
    • It is recommended to run these tanks at 150 PSI for the best performance.
    • Air tanks are not designed for use indefinitely. They must be replaced every 5-10 years or if signs of wear, stress, fatigue, or any sort of damage appear.
    • To ensure the longest use of your tank you should drain it regularly. Allowing condensate to build up in your tank will not only shorten the lifespan of your tank but is a safety concern.
    Learn More
    Quick Shop Compare
  9. FASS Titanium Series Optional Electric Diesel Fuel Heater Kit
    $151.05

    ELECTRIC DIESEL FUEL HEATER KIT

    Features:

    • Dispenses Heat through FASS Pump and Filters
    • Aids in Cold Weather Starts
    • Prevents Fuel Gelling
    • Automatic On/Off Heater
    • Fits Titanium Series System
    • Complete Installation Kit

    Note: Titanium Series Pumps have ports for 2 Electric Heaters.

    Learn More
    Quick Shop Compare
  10. Ultra-Gate 38HP High Pressure Wastegate - Turbosmart
    Special Price $378.22 was $420.00

    Simple, Effective Power Boost

    Features:
    The highest pressure external wastegate of its kind in the world.
    Compact and Light
    Ideal for high boost pressures
    Only 28mm taller than the standard Ultra-Gate38
    Available in Stylish Blue or Black.
    Fits:
    Nearly Any Turbocharged Diesel Engine with Flanges to suit 1 5/8" outside diameter tubing.
    Learn More
    Quick Shop Compare
  11. Lubricity Formula 16 oz/470ml
    $7.50
    Approved by Original Equipment Manufacturers (OEMs) This extra strength lubricity improver is for use with very dry or "winter blend" fuels such as, jet fuel, kerosene or #1 diesel. This product contains no alcohol and is specially formulated for ultra low sulfur diesel. Learn More
    Quick Shop Compare
  12. Throttle Sensitivity Booster Push Button Switch Kit
    $65.00

    Features
    Push button control
    6-modes
    Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Ludicrous"

    Learn More
    Quick Shop Compare
  13. Xtrude Double Stacked Transmission Cooler Kit - Universial 5/8in Tubing
    $606.00
    Features

    Large surface area to transfer heat for external air flow cooling
    Turbulent oil flow design promotes a more complete cooling
    Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal
    Kits complete with all fittings, clamps, hoses and hardware
    Learn More
    Quick Shop Compare
  14. Flow-MaX Add-On Pre Water Separator Filter Kit
    $62.00
    Features
    20 micron efficiency

    Filter Modular Design

    Add-on High Efficiency Filter and/or Water Separator

    Easy to find Non-Proprietary Filter Cartridges

    Learn More
    Quick Shop Compare
  15. High Torque Hose Clamp - 3.5in
    $17.50

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

    Learn More
    Quick Shop Compare
  16. Xtrude Trans Cooler - Double Stacked (No Install Kit)
    $406.00
    Features
    Cooler Assembly Only
    Double stacked cores deliver over 40,000 BTU/HR of cooling
    Over 350% temperature drop versus the factory system
    136% better temperature drop than XTRUDED single core kit
    Motor is IP54 with 65% duty cycle Learn More
    Quick Shop Compare
  17. GAUGE KIT, Back Pressure - 160psi
    $63.00

    Features
    Liquid filled gauge for setting up back pressure regulation on butterfly style exhaust brakes

    Learn More
    Quick Shop Compare
  18. FASS Diesel Fuel Sump Kit With Fass Bulkhead Suction Tube Kit
    $236.55

    Sump Kit With Bulkhead Suction Tube Kit

    Features:

    • Lowers Fuel Suction Location
    • Includes Bulkhead Fitting and Convoluted Suction Tube
    • Eliminates ¼ Tank Fuel Issue
    • Unique Design For Simple Installation
    • No External Fuel Lines

    Note: This product is suggested to be installed with our FASS Titanium Series Lift Pumps. The larger suction tubes and Fuel Sump Bowl improve fuel delivery and work perfectly with a higher volume fuel pumps.

    Learn More
    Quick Shop Compare
  19. BD Diesel 1453523 T6 S400/S300 Turbo Blanket
    $215.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  20. Performance Formula 64oz/1.9L
    $31.52
    The detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque. Stanadyne Performance Formula protects your diesel engine and restores engine performance this product meets all engine fuel system requirements and will not harm exhaust aftertreatment systems.

    Learn More
    Quick Shop Compare
  21. High Torque Hose Clamp - 4in
    $13.00

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles.

    Learn More
    Quick Shop Compare
  22. Universal Electric Cooling Fan Kit - 80-watt 10-inch 800 CFM
    $79.99

    Features
    Use as pusher (default) or puller
    10-inch diameter
    800 CFM flow
    80-watt electric motor
    Universal mounting kit
    Motor is IP54 with 65% duty cycle

    Learn More
    Quick Shop Compare
  23. INTAKE KIT, Track Master - 5-inch Inlet
    $237.00

    Features
    Open air intake kit
    Washable cone style air filter
    Intake pipe coupler
    Clamps
    Intake pipe - 5in

    Learn More
    Quick Shop Compare
  24. Flow-MaX Pump Pressure Spring - 13psi
    $8.00

    Flow-Max pressure regulation springs

    Learn More
    Quick Shop Compare
  25. FASS Diesel Fuel Sump Kit With Suction Tube Upgrade Kit
    $189.05

    Sump Kit With Convoluted Suction Tube Kit 

    Features:

    • Upgrades Existing Bulkhead Fittings
    • Lowers Fuel Suction Location
    • Includes Convoluted Suction Tube
    • Eliminates ¼ Tank Fuel Issue
    • Unique Design For Simple Installation
    • No External Fuel Lines
    • Made in the USA

    Note: This product is suggested to be installed with our FASS Titanium Series Lift Pumps. The larger suction tubes and Fuel Sump Bowl improve fuel delivery and work perfectly with a higher volume fuel pumps.

    Learn More
    Quick Shop Compare
  26. Pypes 5" Dual Stack Stainless Universal Kit With 5" x 10" x 36" Tips
    $880.00

    Here's Your Stacks!

    Features:
    Y-pipe Design - Single Exhaust to Exit From Two Vertical Stacks
    T-409 Stainless Steel Contruction
    Exhaust Includes All Necessary Clamps & Hangers
    Stack Tips are 10" Wide, 36" Long, T-304 Stainless Steel
    Fits:
    Dodge, Ford and Chevy/GMC Diesel Trucks

    IMPORTANT: 2007.5 & Newer Trucks With a DPF Require DPF Delete Tuning.

    Learn More
    Quick Shop Compare
  27. Dual Stage Boost Controller - Turbosmart
    Special Price $213.00 was $235.00

    Improved Turbo Response and Performance

    Features:
    Fast boost response with two fully adjustable boost levels.
    Toggle between high and low boost on the fly.
    Manufactured from high-grade brass and billet aluminum.
    Renowned for their easy installation & robust design.
    Available in Stylish Blue or Black.
    Fits:
    Nearly Any Turbocharged Engine
    Learn More
    Quick Shop Compare
  28. Type5 Supersonic Blow Off Valve and Controller Kit - Turbosmart
    Special Price $450.00 was $499.99

    The Perfect Addition to Tuned Trucks

    Features:
    Superior Flow Type 5 Supersonic BOV
    Reduced Compressor Surge
    Added Protection for the Turbocharger on Tuned Trucks
    Better Acceleration Between Gears
    Famous Supersonic Sound
    Fits:
    Nearly Any Turbocharged Diesel Engine
    Note:
    BOV is Universal Fit and may require some fabrication/welding for installation.
    Learn More
    Quick Shop Compare
  29. BD Diesel 1453521 T3 S300 Turbo Blanket
    $170.00

    Features:

    • Cooler engine compartment temperatures can result in higher density that results in more power
    • Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
    • Retains and normalizes internal turbine housing temperatures for lower spool times
    • Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
    • Also fits most similar size Garrett and Holset turbo applications
    • Comes with stainless steel springs and built in retaining clips for a seamless install
    • Stylized look with custom BD embroidery

    Warranty

    Parts
    • 12-Months
    • 24,000 Miles
    Learn More
    Quick Shop Compare
  30. High Torque Hose Clamp - 2.75in
    $13.00

    Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles.

    Learn More
    Quick Shop Compare
View as Grid List

79 items

Page
Set Ascending Direction
per page