- Edge Insight CTS2 Monitor for 1996+ Diesel Trucks (& Pre-1996 W/ EAS 12v Power Supply Kit)Special Price $434.95 was $499.00
A GREATER INSIGHT INTO PERFORMANCE!
Insight CTS2 Features:
- Color Touch Screen Display
- DTC Read & Clear
- Display True Speed on Monitor
- Rail Pressure Setting
- Injection Timing
- In-Cab Monitoring
- Video Capable
- Alerts and Records
- Performance Tests
- Internet Updateable
- VGT Setting
Fits 1996+ OBDII Vehicles & Pre-1996 W/ EAS 12v Power Supply Kit*Learn More
- High Output LED Headlight Conversion Kit | 4Ever LightingSpecial Price $125.00 was $149.00
Improve the headlight output on your diesel truck with our High Output LED Headlight Kit is designed to work on all vehicles and will provide 3 times the lighting capabilities of your current bulbs. Our LED Kits are built to last and covered by a lifetime warranty. Unlike other LED headlight kits, there is no fan - only a heat sink, this means you don't have to worry about the fan going out. Available in Crystal White. Order By Bulb Size. If you don't know the bulb size contact us or check this bulb guide.
- Lifetime Guarantee: This is the last time you will have to change your headlight bulbs.
- Easy Installation - Simply Replace Your Bulb!
- Integrated Aviation Aluminum Heat Sink instead of the fragile fan found in many kits.
- Included Rubber grommets provide enhanced resistance to moisture
- At up to 3X greater brightness than standard halogen bulbs, you won't believe what you've been missing.
- BD Diesel Xtrude Core Heavy Duty Trans Cooler w/Fan & -10 JIC Male Connection$240.00
Transmission Cooler with Fan
- 22% more cooling over other designs
- 200 Micro Extruded passages
- Large surface area to transfer heat for external air flow cooling
- Turbulent oil flow design promotes a more complete cooling
- Large 5/8-inch ports prevents inlet/outlet restriction
- Furnace brazed rails have been tested to 300psi of pressure
- 80-watt, 10-inch, 800 CFM electric fan
- 33,930 BTU/HR and in excess of 30,000 GVW!
- Motor is IP54 with 65% duty cycle
- Cooler Assembly Only
- 24,000 Miles
- Intended to be used in conjunction with factory transmission coolers and not as stand-alone units
- Exceeding the duty cycle may result in voiding the warranty
- Stanadyne Performance Formula Fuel Additiive 8oz/235ml$5.38
Stanadyne Performance Formula protects your diesel engine and restores engine performance the detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque.Learn More
- 55W Smart CAN-BUS Extreme HID Conversion Kit$200.00
A Lifetime of Bright Light
4Ever Lighting 55W Smart CAN-BUS Extreme HID Conversion Kit
- Over 500% Light output Increase
- Lifetime Warranty
- Smart CAN-BUS Technology Ensures Flawless Function On All Vehicles
- Vibrant 6000K Crystal White or 10,000K Ice Blue
- Easy Plug & Play Installation
Order By Bulb Size. If you don't know the bulb size contact us or check the bulb guide.Learn More
- Duramax Tuner SPADE Performance Autocal for Duramax LML 6.6L 2011-16$799.00
Superior EFI Live Tuning for the Modern Duramax
Switch On-The-Fly Now Available!!!
- 5 Tuning Levels from Optimized Stock to Race
- Tunes Use More Calibrations than Other Brands
- Plug & Play Tuning, Scanning & Diagnostics
- AirDog Diesel Rx Fuel Sump Kit - Universal Fitment$129.00
Eliminate Fuel Delivery Problems
- AirDog Diesel Rx Sump:
- Smaller 4.5" Diameter Mounting Flange
- Simple Installation WITHOUT Dropping the Fuel Tank
- Includes Alignment Set Screws to Aid in Installation
- Corrosion Resistant Components Made in the U.S.A.
- This is a Universal Diesel part.
- BD-Diesel Throttle Sensitivity Booster Push Button Switch Kit$65.00
THROTTLE SENSITIVITY SWITCH
FOR BD-POWER THROTTLE SENSITIVITY BOOSTER (SEE DESCRIPTION)
- Push button control
- Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Ludicrous"
- Not available for 1st generation modules with kit part number starting with "105771", or, 2nd generation kit numbers 1057730, 1057734 or 1057735
- 24,000 Miles
- OIL DRAIN KIT - Borg Warner S300 / S400 / S500 Turbos$70.00
Comes with turbo drain adapter, engine block adapter, 24in length hose and clamps
- HornBlasters TA-508H - 5 Gallon Black 8 Port Air Tank$69.99
Need more air?
- D.O.T. Approved!
- Made In The USA. Quality Does Matter.
- One HornAir 5 Gallon Air Tank
- Product Notes: You *must not* pressurize this air tank over 200 PSI. Doing so is dangerous and may result in serious injury or death.
- It is recommended to run these tanks at 150 PSI for the best performance.
- Air tanks are not designed for use indefinitely. They must be replaced every 5-10 years or if signs of wear, stress, fatigue, or any sort of damage appear.
- To ensure the longest use of your tank you should drain it regularly. Allowing condensate to build up in your tank will not only shorten the lifespan of your tank but is a safety concern.
- Lubricity Formula 16 oz/470ml$7.50Approved by Original Equipment Manufacturers (OEMs) This extra strength lubricity improver is for use with very dry or "winter blend" fuels such as, jet fuel, kerosene or #1 diesel. This product contains no alcohol and is specially formulated for ultra low sulfur diesel. Learn More
- Xtrude Double Stacked Transmission Cooler Kit - Universial 5/8in Tubing$606.00Features
Large surface area to transfer heat for external air flow cooling
Turbulent oil flow design promotes a more complete cooling
Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal
Kits complete with all fittings, clamps, hoses and hardware
- Type5 Supersonic Blow Off Valve and Controller Kit - TurbosmartSpecial Price $450.00 was $499.99
The Perfect Addition to Tuned Trucks
- Superior Flow Type 5 Supersonic BOV
- Reduced Compressor Surge
- Added Protection for the Turbocharger on Tuned Trucks
- Better Acceleration Between Gears
- Famous Supersonic Sound
- Nearly Any Turbocharged Diesel Engine
- BOV is Universal Fit and may require some fabrication/welding for installation.
- BD Diesel UNIVERSAL Flow-MaX Tank Sump Kit$142.00
The Flow-MaX Tank Sump Kit maximizes the amount of usable fuel in a fuel tank and requires NO tank removal simply drill one 3" hole.
- Maximizes amount of usable fuel in tank
- Requires NO tank removal
- Simply drill one 3" hole
- Self-centering drain clamps & seals
- Includes filter screen, 1/2" outlet
- Quickest Install
- Kit includes hole saw
- 12,000 Miles
- Xtrude Trans Cooler - Double Stacked (No Install Kit)$406.00Features
Cooler Assembly Only
Double stacked cores deliver over 40,000 BTU/HR of cooling
Over 350% temperature drop versus the factory system
136% better temperature drop than XTRUDED single core kit
Motor is IP54 with 65% duty cycle Learn More
- BD Diesel 1453523 T6 S400/S300 Turbo Blanket$215.00
- Cooler engine compartment temperatures can result in higher density that results in more power
- Reduces under hood temperature increasing life of hoses, harnesses and coolant bottle
- Retains and normalizes internal turbine housing temperatures for lower spool times
- Custom fit for Borg Warner T3 S300 Wastegated, T4 S300/S400 & T6 S400/S500
- Also fits most similar size Garrett and Holset turbo applications
- Comes with stainless steel springs and built in retaining clips for a seamless install
- Stylized look with custom BD embroidery
- 24,000 Miles
- Performance Formula 64oz/1.9L$31.52The detergency and cetane improver in Performance Formula will help restore fuel economy, increase horsepower and torque. Stanadyne Performance Formula protects your diesel engine and restores engine performance this product meets all engine fuel system requirements and will not harm exhaust aftertreatment systems.
- Universal Electric Cooling Fan Kit - 80-watt 10-inch 800 CFM$79.99
Use as pusher (default) or puller
800 CFM flow
80-watt electric motor
Universal mounting kit
Motor is IP54 with 65% duty cycle
- Dual Stage Boost Controller - TurbosmartSpecial Price $213.00 was $235.00
Improved Turbo Response and Performance
- Fast boost response with two fully adjustable boost levels.
- Toggle between high and low boost on the fly.
- Manufactured from high-grade brass and billet aluminum.
- Renowned for their easy installation & robust design.
- Available in Stylish Blue or Black.
- Nearly Any Turbocharged Engine
- Gauge Kit - Exhaust Gas Temp L/D Truck (Pre Turbo) - Black Face$225.00
Keep track of your exhaust gas temperatures to protect your engine
10' Lead with 1/8"NPT Thermocouple
Black face - Color coded dial - White pointer
Pre turbo install - 1500'f
- Snow Performance MPG-max Water-methanol Injection System- UniversalSpecial Price $899.99 was $947.36
- Made In USA
- Will Not Leave Signature On Vehicle (Warranty Intact Power Added!)
- Increased Fuel Economy
- Reduced EGTs 100-350 Degrees
- Increased HP 65+
- Increased Boost
- Cleans Engine Combustion Of Carbon Build Up
- Reduced Emissions (Less Regen)
Universal - All Makes & Models
Whats In The Box:
- 300 PSI Extreme Environment UHO (Ultra High Output) Pump
- All Tubing Necessary for Installation
- 20 ft ¼ Inch High Temp Nylon Tubing
- 36 Inches High pressure Boost Line
- Digital Variable Mapping Controller
- EGT Probe
- Dual Nozzle Upgrade
- Power Solenoid Upgrade
- Bulkhead Fitting to Tap Into Stock Windshield Washer Fluid
- 2 Nozzle Holder/Check Valve Combo
- 3 Snow Performance Hypersonic™ Nozzles to cover a wide range of HP
- Required Hardware Needed For Installation
- Snow Performance Running S Decal
- Comprehensive Instructions to Install on Any Turbo Diesel Vehicle
- Snow Performance 1-Year Warranty