Powerstroke

View as Grid List

12 Items

Set Ascending Direction
per page
Filter
  1. aFe Power Stage 1 Performance Intake Package for Powerstroke 6.7L 2017
    Special Price $875.00 was $1,018.00

    PRE-ORDER ONLY. AVAILABLE APRIL 2017

    +50 Horsepower+85 Lbs. x ft Torque

    Entry Level Performance Package

    Package Includes:
    Momentum HD Air Intake System
    Dynamic Air Scoop
    SCORCHER HD Module
    Filter Restore Kit
    Features:
    +50 HP / +85 lbs. x ft. Torque Max Gains
    Unique Filter-to-Housing Interface for Easy Installation
    High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
    CAD-Designed Roto-Molded Intake Tube
    Pro 10R 10-Layer Progressively Finer Cotton Gauze Oiled Media for Maximum Performance
    Scorcher HD Module Increases Turbo Boost and Fuel Pressure
    Improved Vehicle Performance, Efficiency and Throttle Response
    On-the-Fly Power Adjustments via LED light switch
    4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
    Fits:
    2017 Ford Superduty 6.7L Powerstroke Diesel Pickups
    Important:
    This Performance package is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
    Learn More
    Quick Shop Compare
  2. Flo Pro 877 RACE DIESEL KIT Downpipe Back FORD Cab & Chassis 11-17
    $449.00
    Flo~Pro 877 4" Downpipe Back Exhaust 2011-2017 Ford 6.7L Cab & Chassis - NO BUNGS - W/ MUFFLER

    Cab & chassis vehicles only (Rear center mounted fuel tank)

    Notice: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. Not for vehicles registered for use on the highway or street. Learn More
    Quick Shop Compare
  3. 2017 6.7L Powerstroke aFe POWER 54-73006-S Momentum HD Dynamic Air Scoop
    Special Price $80.00 was $84.00
    • CAD-Designed Roto-Molded Dynamic Air Scoop
    • Directs forward pressurized air into intake system for maximum performance
    • Direct Snap-in Installation
    • No Cutting or Drilling Required
    Learn More
    Quick Shop Compare
  4. aFe POWER 51-73006 Momentum HD Pro DRY S Cold Air Intake System - Ford Powerstroke 2017 6.7L
    $429.00

    DETAILS:

    • +12 HP and +32 lbs. x ft. Torque max gains
    • Outflows factory intake by up to 21%
    • High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
    • CAD-Designed Roto-Molded Intake Tube
    • Pro DRY S Oil-Free washable/reusable Filter For Maximum Convenience
    • Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
    • No Cutting or Drilling on Factory Parts for Faster Installation
    Learn More
    Quick Shop Compare
  5. aFe POWER 50-73006 Momentum HD Pro 10R Cold Air Intake System - Ford Powerstroke 2017 6.7L
    $435.00

    DETAILS:

    • +12 HP and +32 lbs. x ft. Torque max gains
    • Outflows factory intake by up to 21%
    • High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
    • CAD-Designed Roto-Molded Intake Tube
    • Pro 10R 10-Layer Progressively Finer Cotton Gauze Oiled Media for Maximum Performance
    • Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
    • No Cutting or Drilling on Factory Parts for Faster Installation
    Learn More
    Quick Shop Compare
  6. aFe POWER SCORCHER HD Module for Ford Powerstroke 6.7L 2017
    $449.00

    DETAILS:

    • Quick and easy plug & play installation without any modifications
    • Around 30 minute installation
    • Dyno tested and produced significant power increases of +50 HP / +96 lbs. x ft. torque (Vehicle tested with Momentum HD Intake P/N: 50-73006)
    • Increase turbo boost and fuel pressure to improve vehicle performance, efficiency and throttle response
    • In-Cabin On-the-Fly Power Adjustments via LED light switch
    • 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
    • Leaves no trace on ECU (No Footprint)
    • High quality case & wire harness w/ factory style connectors
    • High reliability, 100% of units tested
    • Compatible with other aFe POWER performance products
    Learn More
    Quick Shop Compare
  7. aFe POWER 46-70022-WL Rear Differential Cover, Machined Fins; Pro Series w/ Gear Oil - Ford Powerstroke 2017 6.7L
    $395.00

    DETAILS:

    • Constructed out of durable cast aluminum
    • Reinforced ribs and wrinkle black powder-coating with machined fins
    • Magnetic drain and fill plug that captures loose particles for maximum rear-end protection
    • Large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling
    • Includes a fully machined groove to accept supplied O-ring for a leak free seal
    • Fits 10.25 & 10.50-12 Bolt Axles
    • Fully Synthetic 75W-90
    • Exceeds API GL-5 Specs
    • High temperature high shear stability
    • Lowers operating temperature
    • No extra additives required
    • Consistent limited slip operation
    • Group IV synthetic base oil
    Learn More
    Quick Shop Compare
  8. aFe POWER 46-70022 Rear Differential Cover, Machined Fins; Pro Series - Ford Powerstroke 2017 6.7L
    $330.00

    DETAILS:

    • Constructed out of durable, cast aluminum
    • Neodymium magnetic drain plug is used for maximum gear protection
    • A 1/8" NPT calibration plug is added and set to the factory fluid level for easier/quicker filling
    • Includes a fully machined groove to accept supplied O-ring for a leak free seal
    • Fits the Ford F-250/F-350/Excursion 10.25 & 10.50-12 Bolt Axles
    Learn More
    Quick Shop Compare
  9. aFe POWER 46-70020 Rear Differential Cover, Raw Finish; Street Series - Ford Powerstroke 2017 6.7L
    $230.00

    DETAILS:

    • Constructed out of durable, cast aluminum
    • Neodymium magnetic drain plug is used for maximum gear protection
    • A 1/8" NPT calibration plug is added and set to the factory fluid level for easier/quicker filling
    • Includes a fully machined groove to accept supplied O-ring for a leak free seal
    • Fits the Ford F-250/F-350/Excursion 10.25 & 10.50-12 Bolt Axles
    Learn More
    Quick Shop Compare
  10. Flo~Pro 5" DPF-Back Exhaust with Polished Tip for Powerstroke 6.7L 2011-17
    $380.00

    A Simple, Affordable, Bolt-On Performance Boost

    Features:
    5" Mandrel Bent Aluminized Steel
    Installs Easily Using Factory Mounts & Hangers
    Includes Polished Stainless Steel Tip
    Fits:
    2011 - 2017 Ford 6.7L Powerstroke Diesel Pickups
    * NOT Suitable for Regular Cab or Cab & Chassis Models
    * Automatic Transmissions Only
    Learn More
    Quick Shop Compare
  11. FLO PRO 5 X 6 X 18 STAINLESS POLISHED ANGLE CUT TIP
    $65.00
    FLO PRO 506018RACB 5" Inlet x 6" Outlet x 18" Length Stainless Polished Angle Cut Tip Learn More
    Quick Shop Compare
View as Grid List

12 Items

Set Ascending Direction
per page