H&S Mini Maxx Race Tuner - Shift-On-The-Fly Power Levels from Stock up to 250HP
Features for Mini Maxx Race Tuner
- Usable on ANY of the below vehicle applications if previous truck is returned to stock tuning
- Precisely tune engine with HP increases of 0-250HP (dependent on application, see below chart)
- Approximate size: 3.5" x 2" (2" x 1.75" color screen)
- Speedometer recalibration for use of non-stock size tires or gearing
- Enable / Disable factory "special features". Check here for more information
- Automatic safety backdown. adjustable by EGT, Boost, Trans. Temp, and Coolant Temp
- Remove / Adjust top speed limiter
- Allows removal of the entire EGR system including cooler with no trouble codes
- Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust or even be plugged in)
- Turn off the EGR system without removing ANY parts
- Comes preloaded with DPF Present and DPF Removed capable tuning
- Read / Clear Diagnostic Trouble Codes
- Custom Tunes are FREE to download.
- Internet updateable w/included SD Memory Card and USB Adapter.
- Digital gauges to monitor up to 20 parameters
- Custom Mounting Solutions available
- 6.4 Powerstroke applications read from the factory manifold pyro and do not need an external pyrometer connection
- Transmission tuning included on the 6.4 Powerstroke
- Made in the USA
Powerstroke 6.4L 2008-10
|Level||Power with DPF Present||Power with DPF Removed|
|Stock||+ 0 HP||+ 0 HP|
|Mild||+ 40 HP||+ 80 HP|
|Wild||+ 80 HP||+ 160 HP|
|Hot||+ 120 HP||+ 250 HP*|
aFe MACH Force XP 4" Stainless Steel Exhaust
The aFe Mach Force XP flange-back exhaust race system delivers maximum performance and improved fuel usage for the Ford Super Duty with the 6.4L Power Stroke engine. This free flowing exhaust system is constructed out of durable 4" mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a clean installation. This system comes complete with all tubing, bayonet hangers, band clamps, thermocouple and pressure tap bungs and is finished off with a high luster polished 304 stainless steel, rolled, slash cut tip. You will be shocked at the performance and mileage improvement you will see from this system. This system requires the use of a controller or programmer.
Installation is a Snap:
This MACH Force-Xp exhaust systems utilizes factory mounting locations providing stability and includes all necessary hardware for hassle-free installation
High quality OE style band clamps are used for a complete 360º sealing surface.
A muffler delete-pipe is used for a true race-inspired sound and maximum flow.
OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Flow and Performance:
This MACH Force XP exhaust system is constructed of mandrel bent 5" stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.
Finishing off the exhaust is a high luster, polished stainless steel clamp-on tip with a laser-etched aFe power logo for an aggressive style.
CMP EGR Cooler Delete Race Kit
- Leaves no trace
- No special tools needed
- Block off plates
- New Gaskets
- Coolant Block Off Plates
Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. Not Intended for use on the highway or street.